Help with outgoing caller ID number...

<< < (3/3)

hwittenb:
Slicemaster,

I just realized that when you login with CallWithUs they have an "Add Caller ID" section that you can click on the account page that comes up to add your preferred CallerID to your account at the account level.  I set that up and they send my preferred caller id on outgoing calls based on my account number without having the number showing up in the Sip Invite.

slicemaster:
hwittenb you're right, however that setting will set the caller id account wide, and I have several different SIP extensions under my one account, all with different caller IDs, hence this solution will not work for me. However, I am pleased to report that the last possible solution RonR recommended WORKED! Thank you so much guys for all your help and support. This community really is awesome and I am so glad I chose OBIHAI for my new ATA.

Anyways, in an effort to contribute to the comunity here and for other callWithUs customers that might be having the same issue where are the setting I used to get everthing up and running properly, and my Caller ID being handled properly.

Service Providers -> ITSP Profile X (X=A/B):
   General:

      General:
      Name -> CallWithUs
      STUNEnable -> Check
      STUNServer -> stun.callwithus.com
      X_STUNServerPort -> 3478

      Service Provider Info:
      Name -> CallWithUs
      URL -> http://www.callwithus.com

   SIP:

      SIP:
      ProxyServer -> sip.callwithus.com
      RegistrarServer -> sip.callwithus.com
      X_SpoofCallerID -> Check

Voice Services:
   SP1 Services:

      SIP Credentials:
      AuthUserName -> YOUR CALLWITHUS USER NAME
      AuthPassword -> YOUR CALLWITHUS PASSWORD

      Calling Features:
      CallerIDName -> YOUR NAME YOU WANT FOR YOUR CALLER ID

Physical Interfaces:
   PHONE Port:

      PHONE Port:
      OutboundCallRoute -> {([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli(THECALLERIDNUMBERHERE >$2)}
      PrimaryLine -> SPX Service (X=1/2)


thanks again everyone!

cheers,
Slice
   

Clive:
I know this thread is a few years old now but came across it and it helped me set up caller ID on the different lines on my Obi202.

Thanks.

ProfTech:
I realize this is an old post but no one mentioned the fact that Caller ID can be set on each sip entry right on CWU web page. hwittenb was correct, but each line can be set individually also. It can be set for all lines or each line right on their web page. Your choice. Just thought this should make it simpler for anyone seeing this post. No need to jump through all the hoops.

Navigation

[0] Message Index

[*] Previous page