Help with iptel and ipkall
RonR:
Quote from: Seattleweather on January 13, 2012, 10:29:11 pm
It's no problem if I call Sp1.
I'm not sure what this means.
Try forwarding ports 16600 - 16998 also.
Seattleweather:
I have setup my Sp1 as me@vbuzzer.com. If I forward the IPKall to Sp1, both sides can hear each other clearly. Call Obi directly seems have problem. Could bt NAT?
RonR:
Quote from: Seattleweather on January 13, 2012, 10:43:37 pm
Could bt NAT?
Yes. Did you forward the port range 16600 - 16998 to see if that corrects the audio problem?
You can confirm the problem is with your router by temporarily connecting your OBi directly to your modem, eliminating the router. Power both units off after making the direct connection. Power the modem up first and wait for it to sync. Then power up the OBi and make a test call.
RonR:
Quote from: Seattleweather on January 13, 2012, 10:43:37 pm
I have setup my Sp1 as me@vbuzzer.com. If I forward the IPKall to Sp1, both sides can hear each other clearly.
Do you mean you're forwarding IPKall to Vbuzzer or to the OBi using your public IP address?
Seattleweather:
I enableed DMZ on my Obi, still has audio problem. I setup IPKall to Vbuzzer, and registry vbuzzer on Obi. In this case, there is no audio problem. ???
Navigation
[0] Message Index
[#] Next page
[*] Previous page