Setting cannot be saved and returns to default

<< < (2/2)

RonR:
Quote from: bren on January 15, 2012, 06:12:49 am

However, when making a 10 digits local call, the local phone system responses with a message like "To place a local call now it is necessary to dial the area code and 7 digits phone number....", It seems the system trims my 10 digits number to 7 digits or sends a wrong number to PSTN line. And, sometimes it gives line busy tone when dialing 10 digits local number.


It appears your PSTN provider no longer supports 7-digit dialing.  Try this:


Service Providers -> ITSP Profile A -> General -> DigitMap:
(<**8>[2-9]xxxxxxxxx|1xxxxxxxxxx|011xx.|(Mipd)|[^*#]@@.'@'@@.)

Physical Interfaces -> LINE Port -> DigitMap : ([2-9]11|[2-9]xxxxxxxxx|1xxxxxxxxxx)

Physical Interfaces -> PHONE Port -> PrimaryLine : SP1 Service

Judgeless:
Quote from: bren on January 15, 2012, 06:12:49 am

RonR,
Thanks a lot for the quick response. I actually read a lot of your comments in other threads and got the idea how to setup the box.

I agree.  RonR you have been a huge help to me also.  Thanks again.

Stewart:
Quote from: bren on January 15, 2012, 09:17:52 am

Both(PHONE1 and LINE1) showed the right 10 digits phone number with the LINE1 showed connected.
When the call is failed (most of the case), I heard the message from local phone carrier like "To place a local call, now it is necessary to dial the area code and 7 digits phone number..... "
Try increasing LINE Port -> DialDelay from 500 to 1000.  This will wait an extra half-second for dial tone.

bren:
Working now! Have made over 10 test calls and did not have a single call failed.
RonR mentioned in other thread that cannot use both OBI tool and OBItalk web tool. So, I reset the box to factory default setup and use OBI tool directly access the box through its IP.
Reconfigured the box to both RonR's and Stewart's recommendation. The box is working now and did have failed call yet. Will test long distance and international calls late when receipts are ready.
Thanks a lot for your help.
 

Navigation

[0] Message Index

[*] Previous page