Long delay after answering incoming call

(1/2) > >>

erict:
I use OBI100 with GV outbound and CallCentric inbound.  After having the OB100 running for about 6 weeks or so, when receiving a call (via CallCentric) inbound, I'd pick up the phone and say "Hello, hello, hello, hello" and it would be 12-15 seconds before the calling party would be on the line to hear it.

I tested this by calling from another phone, and the calling phone hears ringing the entire time I say "hello".  It is like the call is only connected on the receiving side and then there is a long delay before the calling side is connected.

I traced it to the OBI100 by rebooting the device, after which the problem went away.

Is there a way to avoid this condition from recurring other than rebooting the OBI every week or two?

Please advise.

thanks
Eric

Kansas-Family:
I know this post is a little old, but I'm having the same trouble.  Has anyone figured out how to remedy this?

Raki1974:
I am having the same problem, its weird that no one has answered this :(

QBZappy:
Raki1974,,

This is actually something that others have mentioned here on the forum. I suspect that those that take the trouble to post on the forum represent the tip of the iceberg. At the moment it is certainly a known problem. However OBihai are either quietly trying to fix it or they are stumped. Send them a support request, and see what they say and keep us posted.

JohnBowler:
I've experienced the same problem with GV inbound.

A suggestion elsewhere was to simply reboot the Obi (via the web or simply pull the power.)

John Bowler <jbowler@acm.org>

Navigation

[0] Message Index

[#] Next page