Setup Obi110 with OOMA

<< < (2/3) > >>

RonR:
The following will begin dialing immediately after the 10th digit is entered (with no leading 1 will be added):

Physical Interfaces -> LINE Port -> DigitMap:

([2-9]11S0|[2-9]xxxxxxxxx)

makitso:
OK, went into browser and into the device admin screen.  Selected user settings, User defined digital maps.
Entered ([2-9]11S0|[2-9]xxxxxxxxx|1xxxxxxxxxx|011xx.) into digital map2 and did a reboot.  No difference.  Is there something else that needs to be done?

RonR:
You should be changing:

Physical Interfaces -> LINE Port -> DigitMap

unless you have it set to reference User Defined Digit Map2.

If you're making changes in the OBi directly, also remember to set:

System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled

or the OBiTALK Web Portal will overwrite your changes with its settings.

makitso:
Oooooh, tricky.  This is not for the faint of heart.

 Your suggestions solved the problem, many thanks.

makitso:
BTW, could this change [ ([2-9]11S0|[2-9]xxxxxxxxx) ] have been made through the Obi portal instead?  I assume that would be a preferred method?

Navigation

[0] Message Index

[#] Next page

[*] Previous page