Syslog Google Voice data no longer shows outbound calls in 1.3.0 build 2669!?!
etc6849:
Any chance of this ever being fixed?!? EVen the newest firmware still does not display outgoing call data in syslog (for GV).
pc44:
I am not seeing any "<7> FXS:" here with syslog message level at 7. Although I'm using an OBi202 (Build 3397), I do see several entries beginning with "<7> GTALK:" during an outbound GV call as well as "<7> CCTL:NewCallOn Term " -- have you checked for those? Perhaps the syntax has changed. :-\
Of course, it might be completely different between the 202 and the 100/110,
pc44
etc6849:
Just to confirm, you can see dialed calls in syslog with the obi202?
QBZappy:
etc6849,
This might interest you. Using the OBi202 I can see my outgoing call in the syslog. I made several different tests. Showing relevant portions of the syslog. I think calls via phone port is what you are wanting to confirm. It works on the OBi202. You can test for yourself on the OBi100/110.
OBi202->GV (Direct call from phone connected on OBi202) CID OK
<7> CCTL:NewCallOn Term 16[1] ->5145551111,5145551111 172.16.240.10 22/09 13:49:24.656
OBI202->sip (calls were made using the OBiAPP with OBi202 as gateway) CID OK
<7> CCTL:NewCallOn Term 10[0] 290123456->5145551111,5145551111 172.16.240.10 22/09 12:02:41.187
OBI202->Google Voice Using speed dial (calls were made using the OBiAPP with OBi202 as gateway): CID OK on the speed dial call only
<7> CCTL:NewCallOn Term 3[0] 290123456->, 172.16.240.10 22/09 13:27:31.390 (No CID here)
<7> CCTL:NewCallOn Term 16[1] ->5145551111,5145551111 172.16.240.10 22/09 13:27:45.656 (CID after hitting speed dial)
pc44:
etc6849,
QBZappy confirmed outgoing calls. I just received an incoming call today and thought I would post my edited log if it is of any help. It appears incoming Caller ID is functioning as well via syslog:
Code:
<7> CCTL:NewCallOn Term 1[0] ->, IP_Address 23/09 15:05:22.392
<7> [SLIC] Command: 0, 3, 0, 0, 4, 1087619968, IP_Address 23/09 15:05:22.395
<7> [SLIC] CID to deliver: '' 1XXXXXXXXXX IP_Address 23/09 15:05:22.396
and voicemail status check as well...
Code:
<7> GTALKVM:Check VM Succ IP_Address 23/09 14:55:11.380
<7> GTALKVM:state changed from 1 to 0 IP_Address 23/09 14:55:11.380
<7> GTALKVM:VM:0 IP_Address 23/09 14:55:11.381
pc44
Navigation
[0] Message Index
[*] Previous page