PSTN and VOIP Account
Wilbour:
Thanks, I am in. I'll see what kind of changes were made. I followed the above recommendations but nothing works with regards to PSTN phones. They do not dial out using GV and the default number for my phone attached to the 110 is always GV.
Wilbour:
We are making progress! I was using the web interface from OBI but when I accessed the unit directly the default was SP1. Now the phone on the 110 is using my telco # first.
Will keep you posted as I keep testing
RonR:
If you make any changes to the OBi directly, you also have to set:
System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled
or the OBiTALK Web Portal will overwrite the changes you make with its settings.
Wilbour:
I have followed your instructions and my phone connected to the 110 is working as intended.
10 digit dialing is telco
11 digit dialing is GV.
Am I wrong when I thought I could use other phones in the house connected to the telco line that they could access GV either automatically or by dialling **1? For the life of my I cannot use them to make outgoing calls with GV
RonR:
Any telephone(s) that need to use the services of the OBi, either for placing outgoing calls through the OBi or receiving incoming calls from the OBi, must be connected to the OBi's PHONE Port.
Any telephone(s) connected to the LINE port along with the incoming PSTN Line can only place calls and receive calls through the PSTN Line.
Do NOT connect the incoming PSTN Line to the OBi's PHONE Port as this could potentially damage the OBi.
Navigation
[0] Message Index
[#] Next page
[*] Previous page