PSTN and VOIP Account
jalapeno19104:
I think the correct digit map is the following, otherwise I could not get [2-9]11 to work via the LINE port:
(<**8>[2-9]11|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<**8>[2-9]xxxxxx| <**8>(18(00|88|77|66|55)xxxxxxx|<1>8(00|88|77|66|55)xxxxxxx)|011xx.|(Mipd)|[^*#]@@.'@'@@.)
RonR:
If you want [2-9]11 redirected to the LINE Port, that's what you need.
Felix:
Ron's DigitMap assumes that "local" == "7-digits". In more and more places this is not the case. In fact, in Los Angeles (at least in 310 and 818 area codes) for PSTN calls you *have* to dial 11 digits. And which one is free and which one is not you typically don't know until you get a bill...
So, you may as well have voip.ms on SP1, Google Voice on SP2, and Line for 911 calls. I realize, there are some caller ID considerations - neither solution is perfect!
TimDan:
Quote from: Felix on January 26, 2012, 08:52:45 pm
... In fact, in Los Angeles (at least in 310 and 818 area codes) for PSTN calls you *have* to dial 11 digits.
To illucidate the fortunate rest of the country, area codes here in L.A. County
simply ran out of 7-digit telephone nos. Area code 310 (Westside of L.A.) and
818 (San Fernando Valley) now have area codes 424 and 747 laid over them,
respectively, so that a single household can have 2 area codes, possibly having
the same last 7 digits. And calling the other phone line in the same household,
even if they have the same area code, involves dialing 11 digits - as if it were
a long distance call.
TimDan
Sunfiregt:
Can i use Google voice as well but dial a special number to use it?
Navigation
[0] Message Index
[#] Next page
[*] Previous page