Help with forwarding calls to Telco Line on Obi110 when offline

(1/1)

mendel:
My device is setup to use with google voice.

I have the Obi110, and my telco line is going to be a landline with no caller ID... just as a backup for incoming... for 911 calls etc.

I don't want all my calls going there... (as no caller ID) I only want it to go there when I lose internet...

Is this something I can setup in my Obi device? (on google voice the only option is to ring on both lines... which is problematic)

RonR:
911 calls use the LINE Port by default.

To have all other calls go out SP1 (Google Voice) by default, verify the following:

Physical Interfaces -> PHONE Port -> PrimaryLine : SP1 Service

To make calls through the LINE Port instead, prefix the dialed number with **8.


The OBi doesn't have a good mechanism for alternate routing in the case of Internet failure.

You might try setting:

Trunk Group1
TrunkList : sp1,li

Physical Interfaces -> PHONE Port -> PrimaryLine : Trunk Group 1

Then see if calls go out the LINE Port when you disable your Internet connection.  Chances are they will, but not until a substantial period of time has elapsed.

Navigation

[0] Message Index