X_InboundCallRoute Help
RonR:
Quote from: Shammi on February 03, 2012, 02:08:55 pm
would you please let me know what IP address I should add here: the IP address of my internet, computer or the obi’s?
X_Accesslist should contain the IP address of those allowed to make incoming calls to the OBi. That's typically your service provider.
Shammi:
Hi, Does it mean the IP address what i hear when I dial ***1 in X_Accesslist ?
should be in Quote from: RonR on February 03, 2012, 02:37:00 pm
Quote from: Shammi on February 03, 2012, 02:08:55 pm
would you please let me know what IP address I should add here: the IP address of my internet, computer or the obi’s?
X_Accesslist should contain the IP address of those allowed to make incoming calls to the OBi. That's typically your service provider.
skpv:
RonR, Thanks for the unwinding this all, however, this all doesn’t work. It sounds like obihai can’t recognize incoming numbers from Line. It sends All incoming calls to 4031234321 using SP1. do I need to do some other settings?
Quote from: RonR on February 03, 2012, 02:32:58 pm
skpv,
97xxxxxxxx:sp1(4031234567)
Incoming calls which show up in the Call History as 10-digits starting with 97 should be sent to 4031234567 via SP1.
(96xxxxxxxx|93xxxxxxxx):sp1(40387654321)
Incoming calls which show up in the Call History as 10-digits starting with 96 or 93 should be sent to 40387654321 via SP1.
(27xxxxxx|1501|1502|1503|1504):ph
Incoming calls which show up in the Call History as 8-digits starting with 27 or 1501, 1502, 1503, or 1504 should be sent to the PHONE Port.
(94xxxxxxxx|92xxxxxxxx):sp2(20112345678)
Incoming calls which show up in the Call History as 10-digits starting with 94 or 92 should be sent to 20112345678 via SP2.
(98xxxxxxxx):aa
Incoming calls which show up in the Call History as 10-digits starting with 98 should be sent to the Auto Attendant.
sp1(4031234321)
All other incoing calls should be sent to 4031234321 using SP1.
RonR:
Quote from: skpv on February 03, 2012, 07:41:39 pm
this all doesn’t work. It sounds like obihai can’t recognize incoming numbers from Line. It sends All incoming calls to 4031234321 using SP1.
What are you seeing in the OBi's Call History? When you call the OBi's LINE Port from a number such as 9712345678, for example, does the Call History show the incoming CallerID (Peer Number) exactly as 9712345678? If the incoming CallerID shown in the Call History matches the DigitMap rule in the InboundCallRoute, 97xxxxxxxx in this case, it should execute that rule properly and bridge the call to 4031234567 using SP1.
My guess is the incoming CallerID isn't what you're assuming it is and is therefore not matching the rule. The Call History should make it clear what you're dealing with and what the rule needs to be to match it.
skpv:
Hi RonR,
In the history, the inbound peer number space is empty, no number at all.
The incoming Quote from: RonR on February 03, 2012, 08:50:30 pm
Quote from: skpv on February 03, 2012, 07:41:39 pm
this all doesn’t work. It sounds like obihai can’t recognize incoming numbers from Line. It sends All incoming calls to 4031234321 using SP1.
What are you seeing in the OBi's Call History? When you call the OBi's LINE Port from a number such as 9712345678, for example, does the Call History show the incoming CallerID (Peer Number) exactly as 9712345678? If the incoming CallerID shown in the Call History matches the DigitMap rule in the InboundCallRoute, 97xxxxxxxx in this case, it should execute that rule properly and bridge the call to 4031234567 using SP1.
My guess is the incoming CallerID isn't what you're assuming it is and is therefore not matching the rule. The Call History should make it clear what you're dealing with and what the rule needs to be to match it.
Navigation
[0] Message Index
[#] Next page
[*] Previous page