SOLVED: 3-Way Calling via Google Voice Fails

(1/3) > >>

RonR:
SP1/ITSPA : Google Voice (MaxSessions = 2)

SP2/ITSPB : VoIP Provider (MaxSessions = 2)


3-Way Calling is successful placing both calls via SP2.

3-Way Calling is successful placing one call via SP2 and one call via SP1 (either order).

3-Way Calling is unsuccessful placing both calls via SP1, resulting in an OBi response of:

"There is no service available to complete your call."


In all cases, **1 and **2 was used to ensure the call was routed via the desired port.

ShermanObi:
3-Way Calling with Google Voice works.
Please, can you test again. 
OBi110
Firmware 1.1.0 (1892)

RonR:
I'm currently running build 1945.  I'd be happy to revert to 1892 and test again, but the DigitMaps required for use with my VoIP provider rely on the fixes in 1945.  If I revert to 1892 without a way to restore the fixes contained in 1945, I'll lose the ability to use my VoIP provider with the OBi.  It would be a lot of work to undo all the changes I've made here which now rely on a functioning OBi.

Any suggestions you might have are welcome.

RonR:
I just ran the aforementioned tests again (using build 1945). 3-Way calling reliably fails as described when using only Google Voice.  Please advise how you'd like to proceed.

OBi-Guru:
Firmware 1892 has 3 way calling capability on GV but it won't work with your particular digit map issue.
We've upgraded your device to a newer test firmware that allows 2 session GV calls + digit map fix.

Navigation

[0] Message Index

[#] Next page