remote control OBI

<< < (2/3) > >>

baby007:
Sorry for being unclear. The process is like this:
I go to obi ip 192.168.1.26 (get automatically from router)
Change obi port to 8080
Reboot obi
Go to 192.168.1.26:8080
Set static ip to 192.168.1.27
Reboot
Go to new address 192.168.1.27:8080
firefox/IE returns error, cound not find (but I still can ping to 192.168.1.27 though)

Stewart:
Possibly, OBiTalk provisioning is resetting the port.  Confirm that in System Management -> Auto Provisioning, both ITSP Provisioning -> Method and OBiTalk Provisioning -> Method are set to Disabled.

If the above does not help, if your Actiontec router permits, you could forward e.g. external TCP port 8080 to the OBi's port 80.

baby007:
Disable ITSP Provisioning and works perfectly. Thanks a lot guys
One more question: if I have another obi under same network, which port number should I change on that obi?

RonR:
Any unused port should work, like 8081, 8082, etc.

baby007:
Nice. Now it works locally. I am gonna send the obi to another country where they dont currently have a router. They have DSL and the modem. Any one know if setting up the modem to forward port to Obi would be in similar manner as a router? Of else they can buy a router and use the router to forward port to the Obi.

Navigation

[0] Message Index

[#] Next page

[*] Previous page