OBi110 Long delay to get dialtone on landline
RonR:
Quote from: babobi on February 23, 2012, 10:24:40 pm
RonR, I don't understand how to configure the OBI 110 directly WITHOUT using the web portal. How is this accomplished?
1. Determine the OBi's IP address by dialing ***1.
2. Place the OBi's IP address in your web browser address bar as if it were a web site : http://192.168.1.123
3. Log in with a username and password of admin and admin.
4. Set:
System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled
Click Submit at the bottom of any page that has had changes made to it.
Click Reboot in the upper right corner when all desired changes have been made.
MurrayB:
If Auto Provisioning is disabled do speed dials have to be set individually on each Obi?
Thanks!
RonR:
Quote from: MurrayB on February 24, 2012, 07:49:24 am
If Auto Provisioning is disabled do speed dials have to be set individually on each Obi?
If Auto Provisioning is disabled, nothing configures the OBi but you.
MurrayB:
Thanks RonR
Is there a way to print a speed dial list?
RonR:
Quote from: MurrayB on February 24, 2012, 09:36:47 am
Is there a way to print a speed dial list?
Not that I'm aware of.
You can do a 'Save as' in IE of the Speed Dials page and get an XML file, but even IE can't display it afterwards.
Navigation
[0] Message Index
[#] Next page
[*] Previous page