setup username and password for accessing a protected internet
Ostracus:
What's the MAC of the router and the laptop?
Stewart:
Quote from: Rookie on July 07, 2012, 08:29:27 pm
I am able tp ping the OBi IP address from the laptop.
Try rebooting it after logging in to hotel system.
If you can ping the OBi, you can probably log into it from your browser (password is admin/admin, or as shown on OBiTalk portal).
If so, report what is shown in System Status for the various services.
Rookie:
MAC address of the laptop: 10:0B-A9-E5-6B-E4
MAC address of the device: 9C-AD-EF-00-85-3F
I had been able to log into it via the browser. Did as Stewart instructed and the system status shows:
SP1: Connecting to 74.125.142.125
Sp2: Connecting to 74:125.142.125
OBiTALK: Acquiring Service
Both SP1/SP2 have been configured to GV numbers and I have confirmed that they work before bring the device to the hotel.
As I mentioned before, I was able to make it work for a short while last week.
Thanks for helping.
Stewart:
This seems very strange. My first guess is that the hotel's firewall is blocking the connection; many are very restrictive. However, since you had it working just a week ago, it's unlikely that they changed anything.
Does the OBi have the correct date/time? Can you call successfully from Gmail? Do you have a SIP account to try?
Rookie:
Quote from: Stewart on July 08, 2012, 07:36:44 am
This seems very strange. My first guess is that the hotel's firewall is blocking the connection; many are very restrictive. However, since you had it working just a week ago, it's unlikely that they changed anything.
Does the OBi have the correct date/time? Can you call successfully from Gmail? Do you have a SIP account to try?
I am able to call from Gmail.
The OBi does NOT have the correct date/time (20:57:55 01/01/2010, Friday) but I didn't see any option to change it.
More than the hotel, I may have tinkered something but it worked fine yesterday at a friend's house when I tested (after resetting the OBi).
Will look for more ideas/options to get it going as I know it can/will work.
Thanks.
Navigation
[0] Message Index
[#] Next page
[*] Previous page