Speed Dial using the web config tool

(1/4) > >>

Judgeless:
Is it possible to set the Speed Dial using the Internet based web page? If I use the web interface built in to the OBI device I can change them.  Using ObiTalk they do not show up.  When ever I add them manualy they get erased.

RonR:
Quote from: Judgeless on February 12, 2012, 12:43:25 pm

When ever I add them manualy they get erased.


To keep them from getting overwritten by the OBiTALK Web Portal, set:

System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled

Judgeless:
Can I set them with out disabling Auto Provisioning?

RonR:
Quote from: Judgeless on February 12, 2012, 12:51:15 pm

Can I set them with out disabling Auto Provisioning?


Presumably, you can set them on the OBiTALK Web Portal, but I gather that hasn't been working out very well for you.

Judgeless:
Quote from: RonR on February 12, 2012, 12:53:34 pm

Presumably, you can set them on the OBiTALK Web Portal, but I gather that hasn't been working out very well for you.



I can not find were you set them using the OBiTALK web portal.  Here is what it looks like.

http://mbu.com/prius/obi1.jpg

This is how it looks like using the web server in the OBI box.

http://mbu.com/prius/obi2.jpg

For some reason I cannot post pics in the forums.   When I used the img tag it does not show the pic.

Navigation

[0] Message Index

[#] Next page