Speed Dial Settings Speed Dial Settings

(1/3) > >>

Tatus:
In Speed Dial Settings the Soft Phone has ID#1, and I can not change it.
I want to use #1 for my most often called number, but my soft phone's number is barely used.   It is very inconvenient. Is it possibly to change it?

If I  change it manually in my local device, OBiTALK Portal overwright it anywhere. 

jimates:
no way to change it. I think even if you don't put the device in an account number 1 is not selectable.

RonR:
Quote from: Tatus on February 13, 2012, 05:08:42 pm

If I  change it manually in my local device, OBiTALK Portal overwright it anywhere. 


If you disable Auto Provisioning in the OBi, any changes you make to the OBi manually will not be overwitten by the OBiTALK Web Portal:

System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled

RonR:
Quote from: jimates on February 13, 2012, 06:12:01 pm

no way to change it. I think even if you don't put the device in an account number 1 is not selectable.


Speed Dial 1 is usable like any other as long as you don't use the OBiTALK Web Portal.

jimates:
I thought I read a post where 1 and 99 were not usable. Guess I was mistaken.

Navigation

[0] Message Index

[#] Next page