Forwarding / Routing Line Inbound calls on OBi110

(1/2) > >>

conde:
Hello,
I wanted mu Obi110 to forward all Line Port incoming calls to my Iphone soft Obi number.
I have tried Inbound call route : PP and CallForwardingUnconditional to **92xx xxx xxx but it is not working.

I also tried Inbound call route {>(**92xx xxx xxx):pp} with no call forwarding but still not working.

By the way, I disabled Auto provisioning to avoid inbound call route being forced back into ph. Is there a way to avoid this without disabling auto provisioning?

Many Thanks

MichiganTelephone:
Just off the top of my head...

Try changing the **9 to ob and it might work (if it doesn't post again, we'll figure it out).

Example, {>(ob2xx xxx xxx):pp}

krpan:
By chance came across this link courtesy of ShermanObi to a forum post, might be of help and it also talks about use of ob ...

http://www.obitalk.com/forum/index.php?topic=206.msg864#msg864

obi-support2:
conde,

Please try this...
Set the InboundCallRoute of your LINE Port to {pp(ob290123456)}
Replace 290123456 with the actual number of your OBi softclient.

Thank you.

guyinsb:
Sorry, *72 **118058813717# works fine; not sure what I was doing wrong.
InboundCallRoute remains at the default value of ph.

Navigation

[0] Message Index

[#] Next page