911 Calls
RonR:
Quote from: userobi110 on March 11, 2012, 12:40:33 pm
Phone DigitMap:
---------------
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|**0|***|#|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli))
Your PHONE Port DigitMap should be:
Physical Interfaces -> PHONE Port -> DigitMap:
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli))
userobi110:
Thanks a lot - it's working now.
Marc:
Quote from: sic0048 on February 26, 2012, 04:01:21 pm
Then buy another OBi box if you already have two SIP providers. How difficult is that? We are talking about the safety of persons and property here. If you cannot spend the extra $50 for another box and $1.50 per month for a real E911 solution, then I won't have a lot of sympathy for you when your house burns down or a family member dies of a heart attack because the 911 operator didn't have the proper information in the format they are use to dealing with and the help that was desperately needed was delayed in arriving. I mean seriously people, this is a small price to pay for the added protection E911 service provides.
As a fire fighter, paramedic and certified emergency dispatcher, I couldn't agree with you more. A 911 operator can take in as many as 2 calls per minute. E911 has allowed us to automate dispatch processes which speeds up response times by well over a minute and usually multiple minutes.
Consider these facts:
1) A heart without adequate oxygenation will start to die in 90 seconds.
2) A brain without adequate oxygenation will start to die in 3 minutes.
3) General rule of thumb is you have 60 minutes from the moment a trauma occurs to get the patient into the operating room or risk losing life or limb. Every second counts.
Is your life or the lives of your friends, family and relatives worth saving less than $30/year if you amortize the initial equipment, setup costs, and monthly charges over 5 years?
If ANYONE answered yes, then go get yourself admitted to a psychiatric ward at local hospital, but DON'T call 911 to get you there.
bawaji:
Quote from: Rick on March 11, 2012, 08:56:48 am
You must sign up for at least the Pay Per Call plan. Then you sign up for E911 for the $1.50 setup and $1.50 per month. You WILL get a Callcentric number.
Once you get a confirmation from Callcentric, put this in the Physical Interfaces > Phone Port > Outbound Call Route:
{([1-9]x?*(Mpli)):pp},{(<#:>):li},{911:sp2},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1}, {(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Click Submit, Reboot the OBi, call the NON-EMERGENCY number for your dispatch center and ask permission to test E911. When you test it, they should be able to see your name and address, AND the phone number. I asked what it was, the dispatcher noted it was "out of area" and read it to me, it was a California number, see my post on how the Callcentric process works.
Thanks a lot for clarifying. Hope it works out!
omegaroach:
Quote from: sic0048 on February 26, 2012, 04:01:21 pm
Then buy another OBi box if you already have two SIP providers. How difficult is that? We are talking about the safety of persons and property here. If you cannot spend the extra $50 for another box and $1.50 per month for a real E911 solution, then I won't have a lot of sympathy for you when your house burns down or a family member dies of a heart attack because the 911 operator didn't have the proper information in the format they are use to dealing with and the help that was desperately needed was delayed in arriving. I mean seriously people, this is a small price to pay for the added protection E911 service provides.
I don't quite understand this though.
If I have 2 Obi's then I would have to have 2 seperate phone lines correct?
Navigation
[0] Message Index
[#] Next page
[*] Previous page