completely disable message waiting notification with GV

(1/2) > >>

Name:
The message waiting when there is no new message feature is annoying. I use google voice.
I began having these issues when I registered the device on the dashboard and checked the message waiting box.

Now, I would like to completely disable this feature. I have unchecked MWIEnable and X_VMWIEnable, restarted the router, cleared the notification with no power obi110, nothing works.

What should I look at further?

Thanks,

Stewart:
Log into the OBi directly and confirm that for SP1 Service (and SP2 service, if you use both) MWIEnable, X_VMWIEnable and MessageWaiting are all unchecked.  If that's all ok, please describe what annoying indication you are getting (stutter dial tone, flashing light on your phone, etc.)

Name:
I logged in both OBI interface and here. There is no MessageWaiting function although it it described in the admin manual (older edition maybe, latest firmware).
Both MWIEnable and X_VMWIEnable are unchecked (disabled).

Phone is blinking, stuttering dial tone.

Thanks,

Name:
Sorry, I got confused with multi-tasking. I have now disabled these features in OBI interface.
Same issues.

Stewart:
When logged in directly to the OBi (at the IP address reported when you dial ***1), MessageWaiting is not listed under SP1 Service -> Calling Features???  I'm running a somewhat old 1.3.0 (Build: 2586), but it's hard to believe that this was removed from the latest firmware.

Also, under Physical Interfaces -> PHONE Port, try turning off MWIEnable and VMWIEnable.

If no luck, one option would be doing a factory reset and reloading the config.  Another would be to change Tone Profile A, so that Stutter Tone was the same as regular Dial Tone.

Navigation

[0] Message Index

[#] Next page