[S]Anveo setup - No CallerID is appearing when I call my cell phone to test.

(1/2) > >>

Robert.Thompson:
Hello:

How do I set things up so that my Anveo phone number appears as the CallerID when I call my cell phone from my OBi phone?

Thanks.

Stewart:
On Anveo SIP Device Registration page, set Outbound CallerID.

Conceivably, one can spoof (set it dynamically), but both OBi and Anveo have restrictions in that area, so I'm not too hopeful.

Robert.Thompson:
Quote from: Stewart on February 21, 2012, 07:33:19 am

On Anveo SIP Device Registration page, set Outbound CallerID.

Conceivably, one can spoof (set it dynamically), but both OBi and Anveo have restrictions in that area, so I'm not too hopeful.


Sorry Stewart but is this an OBi setting or one that I do on the Anveo site?

Rob.

Stewart:
Set static caller ID on the Anveo site (same page as your SIP credentials).

I don't know what needs to be tweaked to send a dynamic one, or if it's even possible with the OBi.

Robert.Thompson:
Quote from: Stewart on February 21, 2012, 08:12:20 am

Set static caller ID on the Anveo site (same page as your SIP credentials).

I don't know what needs to be tweaked to send a dynamic one, or if it's even possible with the OBi.


Thanks Stewart, it works now! :)

This Anveo stuff & their website sure are more confusing than VoIP.ms!

Navigation

[0] Message Index

[#] Next page