Need help setting up Anveo on Obi 100

<< < (6/6)

rccryan:
I know this thread is old, but I found it useful and wanted to update it with the latest info (obtained from my Anveo E911 settings page) since it addresses several issues brought up in the thread:

Quote

VERY IMPORTANT INFORMATION REGARDING E911 SERVICE!

1. 911 calls are subject to excessive usage terms. Please refer to Terms of Use https://www.anveo.com/legal.asp#e911.

2. For legal reasons we automatically assign e911 call back number and calls from emergency personel to the call back number are automatically forwarded directly to SIP device connected.

3. new Users can dial 933 from SIP/ATA device to test 911 address provisioning as well as audio communication.

Thus, Anveo uses an automatically assigned e911 call back number (probably a random and temporary phone number rather than any phone number you might have associated with their system).

Also, the above post about the E911 excessive usage fee seems to be true (and it has not changed), but note that there is now an automated 933 system to test it.

Navigation

[0] Message Index

[*] Previous page