Obi web interface does NOT like to be accessed remotely
GWCS:
I have set my Obi-110 to have a LAN IP of 192.168.1.110 and web administration port of 8110, however I have left the 5060 port unchanged. I have configured both my modem and router to forward the port accordingly. If I then try to access the Obi from an outside computer using my dynamic DNS address coupled with the port [ mysubdomain.dyndns.org:8110 ] I do get prompted with the User/Password window, and if I enter "admin/mypassword", I seem to log in, but most attempts to access most features give me strange messages like this one:
XML Parsing Error: mismatched tag. Expected: </xsl:when>.
Location: http://mysubdomain.dyndns.org:8110/default.xsl
Line Number 463, Column 13:
Some things I can access remotely, such as the call history, for example.
Why does the Obi web interface only "like" being accessed from a local machine? If that isn't strange enough, I have tried to access it using an Android phone as the remote computer and it simply will not let me get past the username/password stage. It just blanks the two fields, and re-pops the log-in screen, again and again. I am even using Skyfire as my Android browser set for a PC (instead of phone-friendly) view.
Does anyone know what is going on here?
lk96:
Is the IP address you assigned to your Obi configured as static on the Obi?
Or you mapped the Obi MAC address to the mentioned IP address within your router/firewall/NAT box ?
So it is your router that assigns that IP address to your obi over DHCP ?
I had similar issues/symptoms as reported in http://www.obitalk.com/forum/index.php?topic=2628.0
My issues were resolved (at least so far) with using static IP address on the Obi.
L.
GWCS:
No, I have set the Obi LAN address to be a static 192.168.1.110 (no DHCP assignment) and the administration port to be 8110 (notice the theme of 110s since the product is called Obi-110?) I thought it would be easier to remember by choosing those numbers. Anyway, my modem (I use Clear, so you have to set ALL anticipated ports, one might use on one's network, on the modem to forward to the router. The Clear modem's gateway is 192.168.15.1 and my router is set to a static address of 192.168.15.10, so ALL ports forward on the modem to 192.168.15.10 (again, the router's IP address). Then within the router's software, one sets which ports should route to which attached devices (computer, Obi, etc.)
Point being, my port forwarding must be set up correctly, because I AM ABLE TO LOG IN from the outside world, but once logged in, I can only access a small fraction of the menu choices without getting those odd messages that the Obi generates.
I viewed the thread you listed, and it talks about the unit "hanging", which is not something I am experiencing. I am saying that logging into the web interface from outside of my LAN does not behave identically to logging into it from within my LAN. I am very experienced in router configurations and port forwarding, but I have never experienced this type of inconsistency with any device or software. In other words, everything else I have on my network behaves identically whether accessed from within the LAN or from the internet. Further puzzling is my inability to log in from the internet using my Android smartphone. While I *am* getting the Obi's username/password popup window prompt, it simply does not recognize the user/password combination, despite it being correct.
I am new to Obi, and wonder how I might get this thread forwarded to an administrator if you do not have any answers?
QBZappy:
GWCS,
Why are you port forwarding twice?
I don't think you need to have the modem port forwarding anything. If the modem is in bridge mode Dynamic DNS clinet should be on the router pointing itself, and then port 8110 forwarded to the OBi.
Maybe that will clear a path to the OBi.
GWCS:
The way that the Clearwire Motorola modem works, one must first port forward within the modem directing all anticipated-to-be-used ports, individually, through the modem to the static IP address of the router. Then, depending on which port you wish to direct to which attached device, within the router's firmware, forward accordingly to the various attached devices. In case you're wondering, you cannot simply forward ports 1-60000 to the router in one step, even though the modem's firmware allows for a port range. I have tried it and it does not work. Anyway, that's slightly off-topic.
So, yes, in the modem, port 8110 (along with every other port that every computer on my network uses) is directed to 192.168.15.10 (the router's static WAN IP).
Then within the router, port 8110 is directed to 192.168.1.110 (the Obi's static LAN IP)
Notice that I color coded the devices with the different LAN IP ranges (third number of the IP address), to point out that the "double-forwarding" of ports is necessary due to the fact the ports pass through two completely different IP ranges.
Please understand that I *AM* able to log in through a computer, remotely through the internet, so I *AM* dealing with a "cleared path", as you put it. Once logged in, however, I am only able to access some of the Obi's features, such as the call history.
Why I cannot log in at all from a smartphone is a total mystery, when I can do so from a computer.
Navigation
[0] Message Index
[#] Next page