Help with OBI and GV

(1/2) > >>

ziprun:
Set up OBI w/ GV telephone number.  All outgoing calls work fine.  On incoming calls to my GV number it always ask for 4 DIGIT PIN.

How can callers call into my GV number w/o this 4 digit pin requirement?

biomesh:
If you configured the Obi via the device admin page (not the portal) make sure you check X_SkipCallScreening on the SP1/SP2 service config page.

ziprun:
two options available under SP1 Voice Services, Default and x-skipcallscreening (this is checked), submitted and rebooted to test, but still same result.

On income call to GV number it is asking for 4 digit pin.

Thanks.

jimates:
Is the pin request coming from GV or from the Obi AA.
If you checked the Ignore Circle of Trust for New Calls then all calls will go to the AA instead of only those in the Circle of Trust.

ziprun:
The pin request is from Google on all incoming calls, it stops and ask for the 4 digit pin, and then if entered, you get the various options, i.e. 2 for dialing out a number.

I am trying to disable that feature so incoming calls ring on my phone as they should.

I have double checked the sp1 setting and made sure to select according to the first suggestion but this has had no change.

Thanks for the help.

Navigation

[0] Message Index

[#] Next page