Noise on PSTN on pickup (incomming or outgoing)

<< < (2/2)

RonR:
Quote from: klrwaffles on February 26, 2012, 11:56:22 am

I forgot to tell you dialing syntax.  I area code is 763.  To dial my area code I can dial 7 or 763+7.  To dial other local area codes I dial 10 digits.  To dial long distance I dial a 1 prior to the 10.


Then this should be what you need:

Physical Interfaces -> LINE Port -> DigitMap : ([2-9]11S0|[2-9]xxxxxx|[2-9]xxxxxxxxx|1xxxxxxxxxx|011xx.)

klrwaffles:
Works great.  Thanks for your help!

darkus:
Hello,

I just received an OBI110 last week from the Amazon deal. The unit is setup with GV. However, I am getting a constant buzzing and static noise. At first, I thought it was interference from my wifi router, and cellphone. I took the device to a location in the house without any routers, wifi, computers or cellphones, plugged in ONLY the power supply, and a standard land phone. I pickup and continue to get a constant buzzing/static in addition to the dial-tone. Moreover, when I press a key on the phone, the buzzing and static is very noticeable without the dial-tone. Do I have a defective unit and should I return it to Amazon or OBI?

Thank You

Navigation

[0] Message Index

[*] Previous page