Can AA answer the phone after 10 secs (or 2 rings)?
RonR:
Quote from: Felix on March 03, 2012, 05:34:20 pm
Last - as special aside for RonR. I hate going to the device directly! First, it just wouldn't come back until I realized that I need to turn off popup blocker (don't know why, but both IE and Firefox treat the right side as a popup). Even after I did - it is painfully slow! And at least once out of five it times out and gives me XML error. OBiTALK control panel is much nicer... Just saying :P
I've been configuring numerous OBi's directly for the past 12 months using IE9 with the popup blocker enabled and haven't experienced any slowness, XML errors, or any other problems. Direct configuration is quicker and much more reliable... Just saying :P
Felix:
Quote from: Stewart on March 03, 2012, 08:44:41 pm
It appears that you have strange ring settings. Confirm that for both SP1 Service and SP2 Service, X_RingProfile is set to A. Also, check that for Ring Profile A, all Ring Patterns are set to defaults. If you can fix this, you won't have to deal with call forwarding.
SP2 ring profile was set to B (by default). When I changed it to A, GV voicemail started pick up! Hooray!
Quote from: Stewart on March 03, 2012, 08:44:41 pm
Confirm that you set these for SP2 Service and report what appears in Call History for a call that failed to forward.
I am still curious why call forwarding doesn't work ???
Confirmed that it is set for SP2 service.
Same as when nothing is set up to be forwarded:
Code:
Terminal ID GoogleVoice2 PHONE1
Peer Name
Peer Number 1nnnnnn
Direction Inbound Inbound
16:17:11 Ringing
16:17:36 End Call
As far as pop-ups, etc - I did try it from another computer as well. Actually, the problem only started in the last month. Two things happened recently: Verizon changed the modem to a different model, and I upgraded firmware. Also, when I access from LAN, it works much faster, and no need to disable popup blocker. Don't know what's causing it. As I said - minor thing since I like Obi portal better, anyway.
Felix:
I figured out why call forwarding didn't work - I didn't realize that you have to specify format as SP1(phone number) even for default line.
RonR:
Quote from: Felix on April 19, 2012, 07:39:32 pm
I didn't realize that you have to specify format as SP1(phone number) even for default line.
The OBi Device Administration Guide really ought to mention that somewhere.
Felix:
Quote from: RonR on April 19, 2012, 08:04:18 pm
Quote from: Felix on April 19, 2012, 07:39:32 pm
I didn't realize that you have to specify format as SP1(phone number) even for default line.
The OBi Device Administration Guide really ought to mention that somewhere.
The new one (that include 202 information) does. That's how I found out. That said, reading Admin guide is a torture. I wish OBi at least ran it through the spellchecker, and then give it to a competent tech writer for review (and complete rewrite).
Navigation
[0] Message Index
[*] Previous page