Cannot vote on American Idol
TiminCincy:
My wife was upset last night when she tried to vote on American Idol and the 1-866 numbers just rang and never answered. My configuration is Google voice on sp1 and Anveo on sp2 for e911. My device is an Obi100. From searching the forums I have found that the issue is with Google voice not the OBi. My question is there a way to setup toll free calls with the setup I have without using Anveo on sp2? Anveo charges 0.01 per minute for outgoing calls and I am looking for a free solution to dialing toll free numbers (who knows how many times she will vote). I only have a small investment in Anveo and would be willing to switch to another e911 provider if they gave free outgoing toll free calls. I have a little urgency as I need to address this before the show tonight.
Tim
RFord:
See setup in this post by RonR
http://www.obitalk.com/forum/index.php?topic=2357.msg15182#msg15182
Quote
If you don't have good results using proxy.ideasip.com, use tollfree.alcazarnetworks.com or sip.tollfreegateway.com
Since you have Anveo setup on SP2, ignore the following:
Quote
If you don't already have a SIP provider configured on SP2, use the following:
Service Providers -> ITSP Profile B -> SIP -> ProxyServer : 127.0.0.1
Voice Services -> SP2 Service -> AuthUserName : (put anything here)
Voice Services -> SP2 Service -> X_RegisterEnable : (unchecked)
Voice Services -> SP2 Service -> X_ServProvProfile : B
TiminCincy:
Thanks. I had tried one of the setups posted and got error 403 when trying to call. So I reset the settings and tried the ones in the post you quoted and this time it is dialing toll free numbers correctly. I can't test the specific AMerican Idol numbers until tonight when they open the lines, but it appears to be working.
Just to make sure, those changes do not use my Anveo line on sp2, correct?
Tim
Stewart:
Quote from: TiminCincy on February 29, 2012, 01:15:41 pm
Just to make sure, those changes do not use my Anveo line on sp2, correct?
Correct. You can check the OBi's Call History to see how a call was made. If you are really concerned, look st the Reports page on Anveo to make sure that the call is not there and/or check that your Account Balance has not unexpectedly changed.
TiminCincy:
I did get the dialing to work last night and my Anveo account balance hasn't changed so it looks like it worked correctly. When I look at the call history it is unclear to me how to tell which line is being used. Here is what it says:
Terminal ID: Phone1 SP2
Peer Name:
Peer Number: 18664365712 18664365712@sip.tollfreegateway.com
Direction: Outbound
What is confusing to me is an earlier call in the history to a regular phone number has GoogleVoice1 instead of SP2. Is SP2 Anveo or something else?
Tim
Navigation
[0] Message Index
[#] Next page