Weird incoming Google Voice problem
RonR:
System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled
Service Providers -> ITSP Profile A -> General -> Name : Google Voice
Service Providers -> ITSP Profile A -> General -> SignalingProtocol : Google Voice
Voice Services -> SP1 Service -> AuthUserName : (Google Voice username)
Voice Services -> SP1 Service -> AuthPassword : (Google Voice password)
Voice Services -> SP1 Service -> X_SkipCallScreening : (checked)
Physical Interfaces -> PHONE Port -> PrimaryLine : SP1 Service
dhobi:
Thanks. I'll give it a try tomorrow and report back.
dhobi:
UPDATE: If I configure the OBI box manually per RonR's instructions above, it seems to work correctly, I do not need to press '1' to take an incoming GV call. But if I let the OBiTalk portal do it, then I have to press '1' for incoming GV calls. In both cases X_SkipCallScreening is enabled but it seems to work only if I configure my OBI manually. There must be something in my OBiTalk online profile that is messing up the configuration and I have no idea what that might be.
This is very strange! I do believe that messing around with that circle of trust yesterday started causing the problem, as strange as it may sound.
RonR:
Unless you have a compelling reason to use the OBiTALK Web Portal, it's much quicker and easier to configure the OBi directly/manually. Then you know what you're getting and don't waste days of your time trying to solve a mystery that you have no control over.
dhobi:
Quote from: RonR on March 02, 2012, 12:06:43 pm
Unless you have a compelling reason to use the OBiTALK Web Portal, it's much quicker and easier to configure the OBi directly/manually. Then you know what you're getting and don't waste days of your time trying to solve a mystery that you have no control over.
I agree with you, except I'm no expert in the strange device syntax or its features. I like the shortcuts the OBiTalk wizards provide, things like "local area code" for 7-digit dialing, enable GV voicemail notifications, etc. I would not have known these features even existed if it were not for OBiTalk.
I wrote to support, let's say if they find anything.
Navigation
[0] Message Index
[#] Next page
[*] Previous page