Ring after hangup

<< < (4/4)

MurrayB:
Thanks again for both of your inputs.

Having no caller ID on either pots line, I plan on dropping the expensive Verizon package, which would probably not be relevant for this condition which is most desirable.  How would I set up each Obi so that all incoming calls at either location 215xxxxxxx or 609xxxxxxx ring both locations? I assume that they would be transported via the Obitalk network.

Stewart:
Set LINE Port -> InboundCallRoute to e.g.
{ph,pp1(ob234567890)}

In each OBi, use the OBiTalk number of the other.  With other settings at default, incoming calls on either device's Line port will ring the attached phones of both devices.

MurrayB:
Thank you Stewart. Hopefully, I will be able to implement this.

MurrayB:
Works great in one direction sometime next week I will reconfigure the other Obi.

Thanks!

Navigation

[0] Message Index

[*] Previous page