help with new setup with multiple sips
turuncu:
Quote from: Stewart on March 11, 2012, 08:51:12 am
Quote from: turuncu on March 11, 2012, 08:04:49 am
]Betamax is giving me headache but that is another matter.
Possible alternatives to Betamax (usually somewhat higher rates, but better quality and reliability): Voxbeam, CallWithUs, Future-Nine. Where are you calling? Landline or mobile? If mobile, which carrier?
Sorry just saw your message. I call Turkey and Azerbaijan. and betamax usually have some free stuff for Turkey. I used to use callwithus but the customer service was as helpful as betamax and I had to pay for every minute.
I call a combination mobile and landline.
Thanks for your help
turuncu:
Quote from: RonR on March 04, 2012, 01:56:06 pm
Physical Iterfaces -> PHONE Port -> DigitMap:
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**3(Mvg3)|**8(Mli)|**9(Mpp)|(Mpli))
Physical Iterfaces -> PHONE Port -> OutboundCallRoute:
{([1-9]x?*(Mpli)):pp},{(<#:>):li},{911:sp2},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},
{(<**2:>(Msp2)):sp2},{(<**3:>(Mvg3)):vg3},{(<**4:>(Mvg4)):vg4},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Service Providers -> ITSP Profile A -> General -> DigitMap:
(<1>[2-9]xxxxxxxxx|1xxxxxxxxxx||<**4>011905.|<**3>011xx.)
Gateways and Trunk Groups -> Voice Gateway3
Name : Service_Provider_Name
AccessNumber : SP2(SIP_Server_Proxy)
DigitMap : (<011:00>xx.|00xx.)
AuthUserID : SIP_Username
AuthPassword : SIP_Password
Gateways and Trunk Groups -> Voice Gateway4
Name : Service_Provider_Name
AccessNumber : SP3(SIP_Server_Proxy)
DigitMap : (<011:00>xx.|00xx.)
AuthUserID : SIP_Username
AuthPassword : SIP_Password
911 -> SP2
10 or 11 digits -> SP1
011+ -> VG3
011905+ -> VG4
If I wanted to add one more sip provider and route number that start with 011905+ would I do it like above. What I tried to do was add a new sip assign **4. And for the digimap I have put it infornt of **3. Would this work
Thanks
Navigation
[0] Message Index
[*] Previous page