Line out VS Phone

<< < (2/3) > >>

dta20502:
Yes, the phone jack, that I plug the cord into, is working before when I have DSL service. I used this phone jack for DSL internet, so I know it should works! May be the OBi setup problem??

Update: Today, I checked the wall wiring continuity, the 2 connections are good between my dining room and bedroom. There are 4 wires inside the phone cable, my phone uses 2 middle wires (#2,3) and they have been checked good. So the problem definitely in the OBi setup! I want to use the wall phone jack and the OBi phone port but no luck, no tone in other room!!!! Please HELP!!!   Thanks in advance.

-Dennis

MichiganTelephone:
dta20502, read this: How to Distribute VoIP Throughout a Home

denon321:
Hello everyone ,I just bought a OBI 110 ATA device and this is my first post  .
I had it (obi110)set up to use GV(googlevoice) now I need a FWT(fixed wireless telephone)with a sim card connected thru line port. FWT has a  FXS  capable port.
I want to be able to call my gv number and access the sim card in FWT thru OBI portal to make another call or simply receive the gv call thru FWT .
I also want to be able to call sim card in FWT to make a call thru OBI110 portal .

In a second scenario: I need to be able to connect a second FWT2 thru phone port of OBI110 to call FWT 1 and make another call.
I would greatly appreciated if anyone can guide me thru this set up
Regards
  ;)

RonR:
You can access the OBi LINE Port directly from the OBi PHONE Port by dialing a single #.  You should hear dialtone from the FWT at that point.

If the FWT interface behaves like a normal PSTN line, you should also be able to dial out the OBi LINE Port by prefixing the number with **8.

The OBi PHONE Port is an FXS port.  You cannot connect one device's FXS port to another device's FXS port.

denon321:
thanks RonR ,I followed your advise and it works as predicted: dialing single # gives you a dialtone from FWT
dialing out also works**8, BUT when the other party answers he cannot hear me,also when a call is made to the FWT it does NOT ring the phone connected to OBI phone port.
Maybe not related but GV ringing but when pick up cant hear either.
cheers

Navigation

[0] Message Index

[#] Next page

[*] Previous page