January 04, 2022, 09:53:49 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: Loud Static then can't hear other party  (Read 2493 times)
MI_Joe
Newbie
*
Posts: 5


« on: March 07, 2012, 05:37:47 am »

Here is the problem in detail:
Make or receive call and all is well.  6:50-7:10 into the call, loud static sets in and I cannot hear the other party, but the other party can hear us.  The static is only there for 5-7 seconds.  I have watched the OBI100 device and all lights are green as should be... no red lights.  Hang up and immediately call back the party and same thing transpires.

Configuration:
-Charter Internet, 15mb.
-Linksys WRT120N wireless router.
-OBI100 connected to port on Linksys router.
-Phone line to Obi100 connects 3 phones.  The line from the obi100 is new cat5 using 1 pair (2 wires) to punch down block where the 3 phone lines are using new cat5 lines using 2 pair to the phone jack where the phones are connected.
-Google Voice configured for both lines in the OBi100.

Here is what I have tried thus far...
-Set QOS on router to high for OBI device
-Swapped original OBi100 device with new OBi100
-Different phones... all do the same thing
-Phone connected directly to OBI100
-OBI100 connected directly to Internet (bypass router by directly connecting it to cable modem).

I am truly out of ideas.  At this point I think I will try and play with increasing the milliamps on the off hook settings or perhaps decrease it.  Is there tech support for these devices?
Logged
MI_Joe
Newbie
*
Posts: 5


« Reply #1 on: April 21, 2012, 06:29:58 am »

Follow up:

I had this same problem with two of the Obi100 units.  I got a Obi110 last week and have not had this problem at all.  Must be a flaw in the Obi100's.  Not sure what it is, but I hope this helps others and perhaps ObiTalk.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC

Advertisement
Advertisement