Trying to Set-up Call Centric with Obi 110... anyone successful?
Ostracus:
Quote from: RonR on March 12, 2012, 07:04:34 pm
If you're making changes to the OBi directy, you must set:
System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled
or the OBiTALK Web Portal will overwrite your changes with its settings.
UI design. How about a button on both the portal and the device that says "Turn off/on portal management"?
QBZappy:
Not to dwell on the point too much, see this post:
http://www.obitalk.com/forum/index.php?topic=55.msg106#msg106
Quote from: QBZappy on January 24, 2011, 07:22:07 am
Yes, I was referring to Obi unit web page. Looks to me you need to make this a sticky. Conclusion for users is that configuration via web portal or Obi unit can result in conflicting or seemingly confusing configs. Good to know this. Still would like field description on the unit. Tks.
Quote from: OBi-Guru on January 24, 2011, 05:42:42 pm
Good point, we have now made a sticky topic - once the device is managed by OBiTALK portal, better NOT to modify the parameters directly on the device webpage. OBiTALK portal may overwrite those parameters on its regular resync interval.
http://www.obitalk.com/forum/index.php?topic=61.msg109#msg109
helpful55:
Quote from: RonR on March 12, 2012, 07:04:34 pm
If you're making changes to the OBi directy, you must set:
System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled
or the OBiTALK Web Portal will overwrite your changes with its settings.
RonR I had this same problem with my callcentric password. With this I have the first of those two and I changed that, but there is no OBiTALK Provisioning listing. Where to find it or what to do? Thanks.
SteveInWA:
You're posting in a four-year-old discussion.
If you would just upgrade your OBi (discussed in your other thread), you could have configured both Google Voice and Callcentric, right from the OBiTALK portal, by now.
Callcentric: click on the SP you wish (e.g. SP2). On the next page, scroll down to the bottom of the page, select "OBiTALK Compatible Service Providers", and, on the next page, select Callcentric. Enter your Callcentric account's SIP username (1777xxxxxxx) and SIP password, click the button, and you're done.
helpful55:
I responded here as there was mention in here of this being an known issue and they seemed to say that it was getting old re telling people about this solution.
I originally started the Callcentric for in case back when there was all of the scare over GV going away, but I keep it as a backup and it works so GV can call my phone instead of wearing out my phone keypad. I know how to select the SP and I have done all of that as far as upgrading and setting up GV and that works fine. It is not clear that the Callcentric acct. # goes in the box that says Callcentric number. Who would think that means an acct. # especially since both #’s start with a 1 and have 11 digits. They need to change the box to say Callcentric acct. #. I at first started with my CC phone number, but with your words I went to my acct. #. Still no go. I was using the password I use to access my CC account, but when I went into that to look around I see that there is a slightly different password that is called web password. I tried that and it now works. Thanks again.
Navigation
[0] Message Index
[#] Next page
[*] Previous page