Inbound GV call problem - get dead silence when call is answered
OBiSupport:
The Obihai support team is aware of the issue where answered inbound calls are met with silence while the far end continues to hear ringing, eventually going to voice-mail.
This issue has been observed by a relatively small number of users. If you are experiencing the behavior described above, feel free to report this using the Open a Support Request form on the Obihai web site.
AndrewH:
I'm suffering from this problem as well. I first noticed it on the 12th. Call screening was initially enabled on Google Voice, but this problem persists even after I disabled it.
I filled out the support request form, but am posting here too for good measure.
Agate:
Here is the fix:
System Providers --> ITSP Profile A --> RTP: X_UseSSL (set this to default, make sure the box is NOT checked)
RonR:
Quote from: Agate on March 14, 2012, 10:00:16 am
Here is the fix:
System Providers --> ITSP Profile A --> RTP: X_UseSSL (set this to default, make sure the box is NOT checked)
X_UseSSL is disabled (unchecked) by default. How did X_UseSSL get enabled? Did you enable it, did the OBiTALK Web Portal mistakenly enable it, or what?
AndrewH:
Pressing "1" after receiving an incoming call w/ silence did not help.
Navigation
[0] Message Index
[#] Next page
[*] Previous page