Inbound GV call problem - get dead silence when call is answered
BruceW:
Same here. Upgraded firmware this morning. 1.3.0 (Build: 2690)
Can't call out, "you hear one ring then dead air sometimes it just rings and rings". Inbound has to be picked up on cell phone,
Fwd into google voice. Everything has been fine for months.
Netgear router 3700 v1. Obi 110 has Static IP in the DMZ AT&T DSL. Westell modem
in bridge mode. This all started around 3 days ago.
Deleted google voice and re-entered data no go. Tried Ron's
half duplex trick , did not work. Shut down router modem reboot no help.
NetTalk hooked up to line port works good. Tried it with Netalk powered off. no go.
Tried unchecking google chat in Google Voice per Michigan Telephone and then
rechecking that option no go.
richardcoop:
I guess the message of this is that this problem depends on the firmware and not to upgrade unless you are having some problem. It should not to too difficult to get a copy of the firmware that worked for you from Obihai and reinstall it.
jimates:
current
http://www.obihai.com/firmware/OBi-1-3-0-2690.fw
previous
http://www.obihai.com/firmware/OBi-1-3-0-2669.fw
BruceW:
My Obi110 was rebooted at 6:07pm by support team.
I put in a support ticket and it seems ok now !
Working again ! ;D Thank you !
This was their email back to my support ticket.
"There was a parameter "UseSSL" enabled/checked in your OBi.
That parameter is not supposed to be modified from default setting.
We have fixed this, your calls should be ok now."
-Obihai Support Team
maybe this will help out someone else.
not sure what field "UseSSL" is under ?
RonR:
Quote from: BruceW on March 16, 2012, 03:19:40 pm
not sure what field "UseSSL" is under ?
Voice Services -> ITSP Profile x -> RTP -> X_UseSSL
Navigation
[0] Message Index
[*] Previous page