GV voicemail indicator
rlev:
RonR,
I turned off MWIEnable, X_VMWIEnable (submit, reboot)
The message went away ...
I turned them back on (submit, reboot) the message (and stutter) and messageWaiting flag came back
I cleared messageWaiting flag (submit, reboot) and the flag came back again!!
So, I cleared all the read messages in GV and did it again ... message Indicator went away ...
Hmmmmm ... user error? If I have any messages in GV's inbox even after hearing them I have to move them out of the "inbox"? ... I'll have to keep a watch on that and figure out exactly how to retrieve and delete/archive so a read message does not trip the indicator.
Thanks for the help,
Rich
Rich
sic0048:
Just a note for people - make sure you don't have the Google Voice setting to Put Missed Calls in Inbox. If you have this option selected, every time there is a missed call, it will be logged in the Inbox and therefore set of the message waiting indicator. However there is no voice mail, so you cannot reset it by listening to the voice mail over the phone. You have to go into the GV web inbox and mark those missed calls as "read".
pc44:
Quote from: sic0048 on March 26, 2012, 08:44:47 am
Just a note for people - make sure you don't have the Google Voice setting to Put Missed Calls in Inbox. If you have this option selected, every time there is a missed call, it will be logged in the Inbox and therefore set of the message waiting indicator. However there is no voice mail, so you cannot reset it by listening to the voice mail over the phone. You have to go into the GV web inbox and mark those missed calls as "read".
Good point and good advice!
ramjet73:
I've tried all the settings I found in this and the other threads related to MWI on Google Voice and still can't get it to work on my OBI110. I'm on the current firmware (1.3.0 Build 2690) and everything else works fine.
Getting some strange messages on my syslog:
<7> Trying to connect ssl
<7> TC:ssl connected
<7> LHC:Response OK
<7> TCP:Connect OK(lhttpc)57
<7> Trying to connect ssl
<7> TC:ssl connected
<7> LHC:set Retrying:www.google.com, 0
<7> LHC:retrying...www.google.com
<7> TCP:Connect OK(lhttpc)58
<7> Trying to connect ssl
<7> TC:ssl connected
<7> LHC:request timeout, try again 0
<7> GTALKVM:Check VM Failed
<7> GTALKVM:state changed from 1 to 2
<7> GTALKVM:Checking VM....
<7> GTALKVM:state changed from 2 to 1
<7> TCP:Connect OK(lhttpc)22
<7> Trying to connect ssl
<7> TC:ssl connected
<7> LHC:request timeout, try again 0
<7> GTALKVM:Google login failed!
<7> GTALKVM:state changed from 1 to 2
My VM indicators are not activating on my Panasonic phone (unless I check the MessageWaiting box manually) and the Google VM checks are failing. I even had a failed login to Google Voice but I can make calls just fine on GV (SP1).
Do I just have a bad connection to GV? I'm on Clear WiMax if that makes any difference. I know it worked at one time but that was a while ago.
Update: I just deleted the OBI110 device and started over from scratch and I still get the same results. ???
ramjet73
Navigation
[0] Message Index
[*] Previous page