How do I set up another no. to ring when I get a call.

<< < (2/2)

Torino:
I should have asked the question better.  I should not have said land line.   What I want is my Obi line and my cell to ring at the same time.   I had this working before and can not remember if I set it up with Google or Obi.  I did put my cell in GV but it would rind only to my cell and not my Obi line.

RonR:
To have any OBi trunk call your cell phone in addition to ringing the OBi PHONE Port, set:

Trunk -> InboundCallRoute : {ph,xxx(12341234567)}

where xxx is the desired service provider (sp1 or sp2 or li) to call your cell phone via and 12341234567 is your cell phone number.

Torino:
Quote from: RonR on March 22, 2012, 04:25:42 pm

To have any OBi trunk call your cell phone in addition to ringing the OBi PHONE Port, set:

Trunk -> InboundCallRoute : {ph,xxx(12341234567)}

where xxx is the desired service provider (sp1 or sp2 or li) to call your cell phone via and 12341234567 is your cell phone number.



Where do I do this?

RonR:
You can use the OBiTALK Web Portal : OBi Expert Configuration (Introduction)

or

You can log into the OBi at the IP addressed returned by dialing ***1 (username/password = admin/admin) and configure the OBi directly.  If you elect to configure the OBi directly, you must also set:

System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled

Torino:
Can I do this on GV?

Navigation

[0] Message Index

[*] Previous page