Can't Get Call Waiting to Work on Vonage Line Connected to LINE Port
Glenk:
RonR,
Thanks for shedding light on that issue. Syslog worked when I set the syslog server to the IP address of my PC. Here are the results when a called a received via Vonage on the LINE port then a second Vonage caller rings in. The caller ID names and numbers have been altered to protect the innocent. Handle Hook Flash Locally is enabled.
[Mar 31 22:29:14][192.168.10.3]<7> [DAA]: FXO ring on
[Mar 31 22:29:14][192.168.10.3]<7> [0]Ring On
[Mar 31 22:29:14][192.168.10.3]<7> FXO:NewTermState:ringing
[Mar 31 22:29:14][192.168.10.3]<7> fxo: cp proceeding
[Mar 31 22:29:14][192.168.10.3]<142> PARAM Cache Write Back(256 bytes)
[Mar 31 22:29:17][192.168.10.3]<7> ------ caller id (pcm_id: 1) received! ------
------
[Mar 31 22:29:17][192.168.10.3]<7> [0]DAA CND 03312229,14041111111,JOE BLOW
,,,
[Mar 31 22:29:17][192.168.10.3]<7> [0]DAA CND 03312229,14041111111,JOE BLOW
,,,
[Mar 31 22:29:17][192.168.10.3]<7> [SLIC] CID to deliver: ‘JOE BLOW' 140411
11111
[Mar 31 22:29:27][192.168.10.3]<7> [SLIC]:Slic#0 OFF HOOK
[Mar 31 22:29:27][192.168.10.3]<7> [DAA]: FXO OFFHOOK
[Mar 31 22:29:27][192.168.10.3]<7> [DAA]: detecting disconnect tone, reinit: 0
[Mar 31 22:29:27][192.168.10.3]<7> FXO:NewTermState:offhook
[Mar 31 22:29:27][192.168.10.3]<7> FXO:Stop Tone
[Mar 31 22:29:27][192.168.10.3]<7> [DAA] FXO ring off
[Mar 31 22:30:43][192.168.10.3]<0> ---------- CWCID acknowledged!! -------------
--
[Mar 31 22:30:43][192.168.10.3]<7> [DSP]: ---- H/W DTMF ON (level:3) : D @ 72668
251 ms----
[Mar 31 22:30:43][192.168.10.3]<7> [DSP]: ---- H/W DTMF OFF @ 72668261 ms ----
[Mar 31 22:30:53][192.168.10.3]<7> [SLIC]:Slic#0 DOUBLE HOOK FLASH
[Mar 31 22:30:53][192.168.10.3]<7> FXS:DoubleHookFlash
[Mar 31 22:30:53][192.168.10.3]<7> [DAA]: FXO ONHOOK MONITOR
[Mar 31 22:30:53][192.168.10.3]<7> [DAA]: FXO OFFHOOK
[Mar 31 22:30:53][192.168.10.3]<7> [DAA]: detecting disconnect tone, reinit: 0
[Mar 31 22:30:53][192.168.10.3]<7> [0]DAA FXO: ON-HOOK, PARA HANDSET: OFF-HOOK
[Mar 31 22:30:53][192.168.10.3]<7> FXO:NewTermState:line in use
[Mar 31 22:30:53][192.168.10.3]<7> [0]DAA FXO: OFF-HOOK, PARA HANDSET: ON-HOOK
[Mar 31 22:31:59][192.168.10.3]<7> [SLIC]:Slic#0 DOUBLE HOOK FLASH
[Mar 31 22:31:59][192.168.10.3]<7> FXS:DoubleHookFlash
[Mar 31 22:32:14][192.168.10.3]<7> [SLIC]:Slic#0 DOUBLE HOOK FLASH
[Mar 31 22:32:14][192.168.10.3]<7> FXS:DoubleHookFlash
[Mar 31 22:32:58][192.168.10.3]<7> [SLIC]:Slic#0 ONHOOK
[Mar 31 22:32:58][192.168.10.3]<7> [DAA]: FXO ONHOOK MONITOR
[Mar 31 22:32:58][192.168.10.3]<7> [0]DAA FXO: ON-HOOK, PARA HANDSET: OFF-HOOK
[Mar 31 22:32:59][192.168.10.3]<7> [0]DAA FXO: ON-HOOK, PARA HANDSET: ON-HOOK
[Mar 31 22:32:59][192.168.10.3]<7> FXO:NewTermState:onhook
malcom:
I'm running into the same problem. Has anyone found a solution to it?
Navigation
[0] Message Index
[*] Previous page