Physical FXS to FXO Relay - Not functional in OBi110 Hardware ver 3.4
jimates:
Try one more reset process.
Disconnect the power from the Obi
Press and hold the reset switch on bottom
Reinstall power while holding the reset switch
Continue to hold the reset switch until the Obi reboots (took about 40 seconds for me)
I was changing configurations one night and I guess I just wasn't waiting long enough between changes. i was sure that I had bricked the Obi. I tried everything, then I just decided to try doing that and it came back to life.
QBZappy:
Ideasmiths,
I had a similar experience:
Re: Power light blinking, no IP
http://www.obitalk.com/forum/index.php?topic=3252.msg26406#msg26406
Lavarock7:
For those who like tinkering, you could create your own switchover. I used to do that with my dialup modem, automatically disconnecting it from the phone line when there was no electricty.
If power fails, you bypass the OBI.
A 110v DPDT relay and a couple of telephone connectors would do the deed.
Gradius:
Sorry for bump.
This is a real shame, I found out on hard way today.
You won't need to be on rural area to that happens.
I also have v3.4 and they really removed that feature. It was a very bad move from OBi to remove such useful (and necessary) feature.
searchformission:
Quote from: pedro on April 03, 2012, 07:07:47 am
I wrote Obihai support a few days ago asking for clarification on this matter. The following is their response.
"Thank you for contacting the Obihai Support Team.
Your second OBi device is working properly."
Thanks a lot Obihai support. That really clears things up for me. ::)
Just got off chatting with support. Whoever is handling the chat support is terrible.
The type of support I got was being ignored, and got closed down.
I was asking whether there is anything I can do to solve this relay problem with the newer Obi110 hardware. If they don't support it, then tell me so. Ignoring a customer by shutting down, without providing any help is not professional at all.
Question: Is there a way to verify what hardware version the obi110 runs on? Without logging into it via the control panel? Thanks.
Navigation
[0] Message Index
[#] Next page
[*] Previous page