OBi 110 (GV) Forward 2nd inbound call to Obi 100 (GV) when OBi 110 is in use???

(1/2) > >>

jonesjeremya:
I have tried for the last half hour to search for a topic I seem to remember seeing about a month or so ago.  It was very similar to what I would like to accomplish, but now I cannot find it.

I have an OBi110, and an Obi100, already configured and working with Google voice.  I currently have two Google voice numbers available.  I can add more if needed...

I want to setup my OBi's in the following way:  
Scenario:
A call comes in to my primary GV1 number on the OBi 110, the call rings the physical phone attached to the phone port.  The call is answered by a person and that "line" is then "in use".  A second, concurrent call comes in on the same GV1 number, Instead of call waiting...

I would like that second inbound call to be routed to the OBi 100 which will ring a separate physical phone attached to the phone port on the 100.

I know I cannot forward to another GV number, (i.e GV1 > GV2)  However, I did remember reading that somehow, it is possible for the OBi110, to route an incoming call to a different device, i.e the Obi100

I would be grateful for some help on this subject!
Thanks,
Jeremy

RonR:
OBi110:

Voice Services -> SP1 Service -> CallForwardOnBusyEnable : (checked)
Voice Services -> SP1 Service -> CallForwardOnBusyNumber : PP(ob200123456)

where 200123456 is the OBiTALK number of the OBi100

Physical Interfaces -> PHONE Port -> CallWaitingEnable : (unchecked)

jonesjeremya:
Quote from: RonR on March 24, 2012, 12:58:51 pm

OBi110:

Voice Services -> SP1 Service -> CallForwardOnBusyEnable : (checked)
Voice Services -> SP1 Service -> CallForwardOnBusyNumber : PP(ob200123456)

where 200123456 is the OBiTALK number of the OBi100

Physical Interfaces -> PHONE Port -> CallWaitingEnable : (unchecked)



Many Thanks!!!!

Also, I'm guessing there's no reliable way to push a Caller ID name from my outbound GV calls?

RonR:
Quote from: jonesjeremya on March 24, 2012, 01:19:13 pm

Also, I'm guessing there's no reliable way to push a Caller ID name from my outbound GV calls?


Except on SIP calls, CallerID Name is not transmitted.  Google Voice does not use SIP and does not support CallerID Name in any fashion.  CallerID Name is normally a lookup process provided by the receiving service provider.

jonesjeremya:
RonR

Thanks for the info.  I'm not able to get the forwarding working.

What would be the exact syntax for the parameter CallForwardOnBusyNumber: ?

Provided my OBi 100 was 200123456

Thanks again!!

Navigation

[0] Message Index

[#] Next page