Configure Voxbeam

(1/2) > >>

Hortoristic:
Voxbeam not being too helpful - can someone walk me through how to configure SP2 for Voxbeam as it's not in the setup wizard. 

Stewart:
I have VB on a VGx, so I'm not sure that this is correct:

(ITSP Profile B settings)
STUNEnable: checked
STUNServer: (a working STUN server)
ProxyServer: sbc.voxbeam.com

(SP2 Service settings)
X_ServProvProfile: B
X_RegisterEnable: unchecked
AuthUserName: (desired caller ID when not spoofing)
AuthPassword: (anything)

Depending on your router, you may have to forward the RTP port range.

If you have trouble, report details of failure (Does called phone ring? SIP error code, if any? Signaling work correctly? Audio in either direction?)

RonR:
Hortoristic,

Have you configured Voxbeam with your OBi's public IP address?

Hortoristic:
I'm at work at moment - is that an option when registering at VB?  And if so is one approach better than another?

RonR:
Quote from: Hortoristic on March 28, 2012, 11:28:26 am

I'm at work at moment - is that an option when registering at VB?  And if so is one approach better than another?


I believe Voxbeam will only communicate with a SIP client whose IP address is configured in your Voxbeam account settings.

From Voxbeam's web page:

Authentication

Authenticating your calls with Voxbeam couldn’t be simpler; all that we need to know is the IP address(es) that you’ll be sending calls from. You can add and remove IP addresses at any time using your Voxbeam account’s settings page.

Navigation

[0] Message Index

[#] Next page