Configure Voxbeam

<< < (2/2)

PoorMonk:
How do I know what STUNServer: (a working STUN server) - is?

RonR:
Quote from: PoorMonk on March 30, 2012, 04:49:27 pm

How do I know what STUNServer: (a working STUN server) - is?


I find stun.ideasip.com reliable.  If you Google STUN SERVER, you'll find many.  You can use any.

PoorMonk:
do I need to use same user/pass that I use to log into VB?  Do I need URI?

RonR:
Since Voxbeam doesn't use SIP Registration, it would probably be better to configure Voxbeam on a Voice Gateway, saving SP2 for a SIP service provider that does use SIP registration:

Voice Services -> Gateways and Trunk Groups -> Voice Gateway3
Name : Voxbeam
AccessNumber : sbc.voxbeam.com
DigitMap : (<ppppppp>(<1aaa>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|1xxxxxxxxxx|<011:>xx.))
AuthUserID : (CallerID)

where ppppppp is 0011103 for standard routes and 0011101 for premium routes, and aaa is your local area code.

If you don't have a SIP provider configured on SP2, configure SP2 as follows:

Service Providers -> ITSP Profile B -> SIP -> ProxyServer : 127.0.0.1

Voice Services -> SP2 Service -> X_ServProvProfile : B
Voice Services -> SP2 Service -> X_RegisterEnable : (unchecked)
Voice Services -> SP2 Service -> AuthUserName : (put anything here)

Voice Gateway3 can then be integrated as service route access code **3:

Physical Interfaces -> PHONE Port -> DigitMap:

([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**3(Mvg3)|
**8(Mli)|**9(Mpp)|(Mpli))

Physical Interfaces -> PHONE Port -> OutboundCallRoute:

{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},
{(<**3:>(Mvg3)):vg3},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}

Navigation

[0] Message Index

[*] Previous page