Reduce dial time on PHONE port with SIP provider

<< < (2/4) > >>

RonR:
If you're configuring the OBi directly, you must also set:

System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled

or the OBiTALK Web Portal will overwrite your changes with its settings.

gmichels:
Quote from: RonR on March 29, 2012, 04:59:23 pm

If you're configuring the OBi directly, you must also set:

System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled

or the OBiTALK Web Portal will overwrite your changes with its settings.


I did the change using the Web Portal... looking at both the portal and the device, I think the new DigitMap is in effect.

Here are two screenshots, one from the portal, the other from the device's admin page.

Thanks

RonR:
Is the delay eliminated by dialing # at the end of the number?

Everton:


You do have this in your digimap:  00xxxxxxxxxxxx when it should be 00xxxxxxxxxx!!!


Quote from: RonR on March 29, 2012, 05:09:20 pm

Is the delay eliminated by dialing # at the end of the number?

gmichels:
Quote from: Everton on March 29, 2012, 05:22:54 pm



You do have this in your digimap:  00xxxxxxxxxxxx when it should be 00xxxxxxxxxx!!!


Quote from: RonR on March 29, 2012, 05:09:20 pm

Is the delay eliminated by dialing # at the end of the number?



Yes, I know, when I wrote the pattern above I forgot 2 digits for selecting the long distance provider I want, so when I actually changed the DigitMap I added the extra 2 x.

Quote from: RonR on March 29, 2012, 05:09:20 pm

Is the delay eliminated by dialing # at the end of the number?


Yes, adding the # at the end makes the PBX to immediately detect the the phone as off the hook and the call is placed very quickly.

Thanks

Navigation

[0] Message Index

[#] Next page

[*] Previous page