OBi100 as IP phone on OBi110 using SIP

<< < (2/2)

azrobert:
If your IP phone can call without registration then you can use the above setup.  I helped someone whose IP phone didn't have the No Registration option and the phone failed to register to the OBi1xx. He still tried a call and it worked.

To see if your phone will work, don't make any changes to the OBi110 unless you modified SP2's X_InboundCallRoute to block scanners. If you have, temporarily change the X_InboundCallRoute to "ph" without the quotes. Set the Proxy on the phone to the IP address of the OBi110 and port 5061. Set the UserID and password to anything you want. Now make a call by dialing zero. If the phone connected to the OBi110 rings then the setup will work. Your requirements are not as extensive as the above setup. If you need help simplifying the configuration, post back.

If the above setup won't work:

Here is a more complex setup using PBXes.org:
http://www.obitalk.com/forum/index.php?topic=5411.0

You can use your Callcentric account and the Auto Attendant for 2 stage dialing:
http://www.obitalk.com/forum/index.php?topic=7606.msg48943#msg48943

Navigation

[0] Message Index

[*] Previous page