Free Betamax providers without funding?

<< < (2/2)

N7AS:
If I add {(<011:00>xx.|00xx.):sp2}, to the begining of my PHONE Port >> Outbound CallRoute, would that be the correct format as I want it to out sp2 (Localphone)?

RonR:
What I posted was intended to replace |011xx.| in the SP2 DigitMap.

N7AS:
In my Service Providers >> ITSP Profile A >> General >> DigitMap: I have |<**2>011xx.| so it goes out sp2

I see that there is a |011xx.| in the sp2 Profile B DigitMap, but...
My Primary Line is sp1 (GV) and Localphone is on sp2 Profile B. I want it to go out sp2.

So I guess I should add it to the Profile A DigitMap as |<**2>(<011:00>xx.|00xx.)|  correct?

RonR:
Leave ITSPA (SP1) as it was : |<**2>011xx.|

Only change ITSPB (SP2) : |<011:00>xx.|00xx.|

011+ wil get redirected from SP1 to SP2 where it will be transformed to 00+.

N7AS:
Thanke RonR

I made the change. Will try it out later.

Navigation

[0] Message Index

[*] Previous page