News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

Free Betamax providers without funding?

Started by N7AS, April 07, 2012, 10:54:14 AM

Previous topic - Next topic

N7AS

Free Betamax providers without funding?

I have a UKDDI DID which is forwarded to an Anveo SIP URI (sip:1555xxxxxxxxxx@anveo.com) on my OBi100.

I would like to setup a voice gateway with a betamax provider that I won't have to fund with money to call their Free countries. I would like to test my UKDDI DID. If so, what should I put in the voice gateway fields? Digimap? I have one voice gateway free for this function. This will be used from my OBi110 to call into the other OBi100.
Grant N7AS
Prescott Valley, AZ
https://www.n7as.com

A journeyman electrician sent his apprentice with a 5-gallon bucket and was told to put the ends of the service drop in the bucket and fill it with volts. He was there all day.


Stewart

"Free" calls on Betamax aren't really free.  Except for one free test call given by some brands at signup, funding your account for €10 or more gives you 120 "freedays", capped at 300 min. per sliding week.  Unless you can either use most of that allowance (without going over) or spend your credit on other destinations where they offer good value, it isn't all that good a deal.  Depending on payment mode and location, you will be hit with VAT, processing fees, and/or currency conversion charges.

N7AS

Thanks RonR and Stewart...

I have another thought...
I use VoiceGateways 1 through 5 for SIP to GV  gateways through simonics.com with VG identifires of *1 through *8
VG7 is for TollFree with callwithus and VG8 for iNum callling.
Maybee I could use VG6 for international calls through Licalphone.

Here is my setup:
SP1: GV (Primary)
SP2: Localphone

I read somewhere on here that Localphone uses 00 instead of 011 before the country code??

I would like to know what I have to do with my DigitMaps in order to call international numbers through Localphone and still use 011.
Grant N7AS
Prescott Valley, AZ
https://www.n7as.com

A journeyman electrician sent his apprentice with a 5-gallon bucket and was told to put the ends of the service drop in the bucket and fill it with volts. He was there all day.

RonR

To map 011+ to 00+:

(...|<011:00>xx.|00xx.|...)

This also allows dialing 00+ in addition to 011+.

N7AS

If I add {(<011:00>xx.|00xx.):sp2}, to the begining of my PHONE Port >> Outbound CallRoute, would that be the correct format as I want it to out sp2 (Localphone)?

Grant N7AS
Prescott Valley, AZ
https://www.n7as.com

A journeyman electrician sent his apprentice with a 5-gallon bucket and was told to put the ends of the service drop in the bucket and fill it with volts. He was there all day.

RonR

What I posted was intended to replace |011xx.| in the SP2 DigitMap.

N7AS

In my Service Providers >> ITSP Profile A >> General >> DigitMap: I have |<**2>011xx.| so it goes out sp2

I see that there is a |011xx.| in the sp2 Profile B DigitMap, but...
My Primary Line is sp1 (GV) and Localphone is on sp2 Profile B. I want it to go out sp2.

So I guess I should add it to the Profile A DigitMap as |<**2>(<011:00>xx.|00xx.)|  correct?

Grant N7AS
Prescott Valley, AZ
https://www.n7as.com

A journeyman electrician sent his apprentice with a 5-gallon bucket and was told to put the ends of the service drop in the bucket and fill it with volts. He was there all day.

RonR

Leave ITSPA (SP1) as it was : |<**2>011xx.|

Only change ITSPB (SP2) : |<011:00>xx.|00xx.|

011+ wil get redirected from SP1 to SP2 where it will be transformed to 00+.

N7AS

Thanke RonR

I made the change. Will try it out later.

Grant N7AS
Prescott Valley, AZ
https://www.n7as.com

A journeyman electrician sent his apprentice with a 5-gallon bucket and was told to put the ends of the service drop in the bucket and fill it with volts. He was there all day.