e911 question using callcentric

<< < (2/2)

0100:
Everything is working great but have a question.

If I do this: http://michigantelephone.wordpress.com/2012/04/15/how-to-use-the-simon-telephonics-google-voice-gateway-with-an-obihai-device-to-provide-caller-id-name-on-incoming-google-voice-calls/

Will I still be able to just dial 911 and the call with go straight to SP2 callcentric?

Or will I now have to dial **2911?

Thanks!!

RonR:
911 support on an OBi110 with Callcentric on SP2 should be configured as follows:


Physical Interfaces -> PHONE Port -> OutboundCallRoute:

{([1-9]x?*(Mpli)):pp},{(<#:>):li},{911:sp2},{**0:aa},{***:aa2},
{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}


911 calls will be automatically routed to SP2 (Callcentric).

MichiganTelephone:
Quote from: 0100 on April 30, 2012, 06:12:12 am

Everything is working great but have a question.

If I do this: http://michigantelephone.wordpress.com/2012/04/15/how-to-use-the-simon-telephonics-google-voice-gateway-with-an-obihai-device-to-provide-caller-id-name-on-incoming-google-voice-calls/

Will I still be able to just dial 911 and the call with go straight to SP2 callcentric?

Or will I now have to dial **2911?

Thanks!!


Note that when you configure service providers, there is a checkbox that says "Use This Service for Emergency 911 Calls" and in the article I tell you "DO NOT CHECK THIS!!!" for the service provider that goes to Simon Telephonics.  But you SHOULD check that box for the service provider associated with CallCentric.  If you do that, you should NOT need to make any manual changes to the OutboundCallRoute (although, if you know how it would not hurt to take a look at it and make sure it's configured properly, just to be on the safe side).

0100:
Awesome thanks guys!

JLee:
Hi,

This is a description of my Obi 110's Phone OutboundCallRoute "code string" after I set up Callcentric's e911 on its SP2:

{911:sp2},{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}

Should it work w/ callcentric's 911 calls or do I need to modify the "<#:>l911):li" part suggested in previous posts?

Appreciate your feedback.

jLee

Navigation

[0] Message Index

[*] Previous page