Any way to get Message Waiting Notification from the PSTN line?
hwittenb:
Dani,
Here is an voip.ms approach that I just tested and at least for now it works.
Setup a new voip.ms subaccount and specify your preferred caller id for outgoing calls, but leave the main account and other subaccounts caller id blank. Make your outgoing calls with this subaccount. I tested it by registering the subaccount under SP2.
Then call forward or use inbound routing for the call forward to your voip.ms main account using a sip uri. The main account doesn't have a substitution caller id specified. I tested using the Line Port inbound routing.
I also tested it by putting the voip.ms subaccount under one of the Gateways and outbound calling thru that. That's what I did first and it worked, so then I tried it directly under SP2.
I'd swear I had almost the same thing yesterday and absolutely wouldn't work this way so something is pretty touchy with voip.ms regarding the settings.
dani:
I have an Linksys 2102 hanging on the main acct.
Will move it to a new sub-acct, clean up the setting of the main acct and try again.
It looks like voip.ms is using the contents of these settings in more places than advertised.
Thanks
Novice:
Quote from: RonR on April 13, 2012, 09:46:14 pm
The OBi doesn't support MWI through the LINE Port.
Is there any fundamental reason why it can't, or is this something that could and should be added?
Navigation
[0] Message Index
[*] Previous page