Quote from: mike_forum on April 14, 2012, 11:54:39 AM
When I try **1 951-2##-####. I just get there is no service to complete call.
It appears your OBi may be totally unconfigured at factory defaults. In this state, an OBi sends all calls out the LINE Port to the PSTN Line (Verizon in your case).
Quote from: mike_forum on April 14, 2012, 11:54:39 AM
How do I verify and check the following:
Physical Interfaces -> PHONE Port -> PrimaryLine : SP1 Service.
If you use the OBiTALK Web Portal :
OBi Expert Configuration (Introduction)You can just as easily configure your OBi manually (all other settings at Default):
System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled
Google Voice on SP1:
Service Providers -> ITSP Profile A -> General -> Name : Google Voice
Service Providers -> ITSP Profile A -> General -> SignalingProtocol : Google Voice
Service Providers -> ITSP Profile A -> General -> DigitMap:
(<1aaa>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|1xxxxxxxxxx|011xx.)
where aaa is your local area code.
Voice Services -> SP1 Service -> AuthUserName : (Google Voice username)
Voice Services -> SP1 Service -> AuthPassword : (Google Voice password)
Voice Services -> SP1 Service -> X_SkipCallScreening : (checked)
Physical Interfaces -> PHONE Port -> PrimaryLine : SP1 Service
Remember to click Submit at the bottom of any page you make changes to.
Click Reboot in the upper right corner after all changes have been made.