Setting Up Caller ID shown Name and Number on OBI110 !!! HELP
bjmjpl:
ok sorry - let me try again....
all i am trying to do is forward GV to CC and have it ring the obi so i get CNAM then have CC catch the voicemail so i can have email attachment.
Everything except the ringing to the obi is working.
Except the unit seems to not have high quality whenever i start putting the code in for CC...its worked fine for months...
GV is connected and CC is registered on CC website and right now (it changes) it is REGISTER FAILED no response from server under STATUS
ITSP Profile B
SIP
ProxyServer = callcentric.com
ProxyServerPort = 5060
same for registrar server, user agent domain, and outbound proxy
SP2
X_InboundCallRoute = {('MYNAME'):aa},{ph1,ph2}
Authname and password are correct and i changed the password in text box and on the cc website prefereces to make sure...
does this help? thx again - im really at a loss here...and im installing them for other people....
QBZappy:
Quote from: bjmjpl on July 24, 2012, 04:38:03 pm
CC website and right now (it changes) it is REGISTER FAILED no response from server under STATUS
Well that explains things. Figure that out.
bjmjpl:
okay days of back and forth and i have it now back to where i did before - everything works except it is unusable because any length of call results in a harsh disconnect.
CC is telling me to put the ip address of he obi 202 in the dmz of the router but i have been reading and not only is it dynamic but its acting as a DHCP server by default?
is that an issue? i have my obi behind my router obviously so i have read on here in the past that assigning it a static ip doesnt work well
is there a good way to assign the 202 a static ip?
thx!
jimates:
I would separate the 2 providers from the start.
Get CC working with the Obi.
Get GV working with the Obi.
Uncheck google chat in your phones list.
Add your CC number to your phones list.
Glenk:
I have been trying to configure my setup to get caller ID name on my Google Voice line but so far I've had no success. Here are the steps that I followed:
1. Signed up for a Call Centric free number in New York state without E911 service.
2. Configured my OBI110 for Call Centric on SP2 using the OBITALK web site (already had Google Voice on SP1).
3. Tested for CID name by dialing the Call Centric NY number but only get CID number, no name.
4. Deleted the OBI device on the OBITALK web site and reset the OBI110 to factory default.
5. Configured Call Centric on SP1 (nothing on SP2) still no Caller ID name, only number when a call comes in on the Call Centric number.
6. Deleted OBI device and reset to Factory default again.
7. Configured Google Voice on SPI and Call Centric on SP2. Unchecked forward calls to Google Chat and checked box to send calls to Call Centric number. Still no CID name when calls route through the GV or CC numbers.
Is it possible that there is no CID name service for Call Centric numbers that don't have E911?
Also, I've tried configuring Service Prviders>>ITSP Profile B>>SIP>>RegistrarServer and UserAgentDomain to "callcentric.com" but those 2 fields always revert back to default (blank) after a couple of minutes.
Can anyone explain these 2 problems?
Navigation
[0] Message Index
[#] Next page
[*] Previous page