Check phone line
jimates:
check the up time in the system staus of the device to see if it has rebooted during the time between uses.
deadsea:
Thanks.
UpTime 0 Days 18:12:51 (4)
Not sure what is the (4) means.
jimates:
Reboot Reason Codes
0: Reboot on Power Cycle
1: Operating System Reboot
2: Reebot after Firmware Update via provisioning or phone (***6)
3: Reboot after New Profile Invoked
4: Reboot after Parameter Value Change or Firmware has changed and invoked via device web page
5: Reboot after Factory Reset using the OBi device hardware pin
6: New Profile Invoked AND Profile URL Changed
7: Reboot from SIP Notify (Reserved)
8: Reboot from Telephone Port (IVR)
9: Reboot from Webpage - No change in parameter value(s) or firmware
10: Reboot During OBiTALK Signup
11: Reboot During OBiTALK Signup
12: Reboot after DHCP server offers IP, GW-IP and/or Netmask different from what the OBi device is currently using
13: Reboot on Data Networking Link Re-establishment
18: Reboot on WAN IP address change (OBi202/OBi302 only)
19: Reboot on LAN IP address change (OBi202/OBi302only)
QBZappy:
Quote from: deadsea on October 28, 2012, 07:09:38 am
Thanks.
UpTime 0 Days 18:12:51 (4)
Not sure what is the (4) means.
Quote from: jimates on October 28, 2012, 10:25:00 pm
Reboot Reason Codes
4: Reboot after Parameter Value Change or Firmware has changed and invoked via device web page
It would be interesting to see what the Reboot reason Codes are for others. We have not been asking for people to mention the Reboot Reason Code for a comparision. If the OBi reboots as if making a change on the OBiTALK web portal, then this is undesirable. It highlights the fact that the OBi itself can be victim of DDOS attacks.
Navigation
[0] Message Index
[*] Previous page